Passport EX 4WD V6-3.2L DOHC (6VD1) (2000)
7. Pull out the trim panel at the 8 clip positions.
-
Disconnect the power window switch connector and courtesy light connector.
8. Remove the power window switch, if equipped.
9. Remove the bracket.
10. Remove the waterproof sheet.
-
Taking notice of the door harness, peel the waterproof sheet off the door panel carefully.
11. Disconnect the locking links and remove the door lock assembly fixing screws to remove the door lock assembly.
Installation
To install, follow the removal steps in the reverse order, noting the following points.
1. Apply chassis grease to the lock assembly and striker moving surface.