honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Brakes - Revised Brake Bleeding Procedure|Page 4780 > < Wheel Speed Sensor|Front|Page 4771
Page 1
background image

Brake Bleeding: By Symptom
Brakes - Revised Brake Bleeding Procedure

01-016

January 30, 2001

Applies To: 
1998-01 Passport - ALL

Service Manual Update: Revised Brake Bleeding Procedure

BACKGROUND

The brake bleeding procedure in the 1998 thru 2001 Passport Service Manuals is incomplete. Use this service bulletin to update the manuals.

WARRANTY INFORMATION

None.

CORRECTIVE ACTION

1.

In the 1998, 1999, 2000, and 2001 Passport Service Manuals, on pages 5A-21 and 5A-22, cross out the entire Tech 2 Service Bleed procedure.

2.

In each manual, on page 5A-21, write this note
See page 5C-10 for the brake bleeding procedure

3.

In each manual, on page 5C-10, between steps 1 and 2, write this note: For important additional information, see Service Bulletin 01-016, Service
Manual Update: Revised Brake Bleeding Procedure, Filed under Brakes.

SERVICE MANUAL UPDATE INFORMATION

To avoid trapping air bubbles in the ABS hydraulic unit while bleeding the brakes, the hydraulic unit must be tilted forward at a 15-degree angle or
greater. Before bleeding, check the angle of the ABS hydraulic unit with an angle locator level. If needed, raise the rear of the vehicle to get the proper

Brakes - Revised Brake Bleeding Procedure|Page 4780 > < Wheel Speed Sensor|Front|Page 4771