honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Rough Idle And/Or Diagnostic Trouble Code (DTC) stored|Page 1643 > < Crankshaft Main Bearing Seal|Service and Repair|Page 1634
Page 1
background image

Intake Manifold Gasket: Customer Interest
Rough Idle And/Or Diagnostic Trouble Code (DTC) stored

00-010

February 1, 2000

Applies To:
1998-99 Passport-ALL
2000 Passport-From VIN 4S6..58W..Y4400001 Thru VIN 456..58W..Y4407271

Rough Idle and/or DTCs P0171, P0174, or P1171

SYMPTOM

Intermittent rough idle and/or the MIL is on with DTC P0171 (Fuel Trim System Lean Bank 1), P0174 (Fuel Trim System Lean Bank 2), or P1171 (Fuel
Trim System Lean During Acceleration), and normal troubleshooting procedures have not resolved the problem.

PROBABLE CAUSE

Cracked intake manifold gasket(s).

CORRECTIVE ACTION

Replace both intake manifold gaskets.

PARTS INFORMATION

Intake Manifold Gasket (2 required):

P/N 8-97237-538-0, H/C 6312086 

EGR Valve Gasket:

P/N 8-97104-317-1, H/C 4909776 

Throttle Body Gasket, 1998-99 models:

P/N 8-94389-939-0, H/C 4389037 

Throttle Body Gasket, 2000 models:

P/N 8-97193-729-1, H/C 6198329

WARRANTY CLAIM INFORMATION

In warranty: 
The normal warranty applies.

Operation Number:

111115

Flat Rate Time:

1.1 hour

Failed Part:

P/N 8-97131-894-2
H/C 5510771

Defect Code:

017

Contention Code:

C99

Template ID:

00-010 A (1998-99 Models) 
00-010 B (2000 Models)

Skill Level:

Repair Technician

Out of warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your
Zone Office. You must request consideration, and get a decision, before starting work.

REPAIR PROCEDURE

Refer to page 6A-22 of the 1998,1999, or 2000 Passport Service Manual.

1.

Remove the intake manifold from the cylinder heads. Separating the upper and lower intake manifold sections is not necessary.

2.

Remove both old intake manifold gaskets. Be sure to carefully remove all of the old gasket material.

Rough Idle And/Or Diagnostic Trouble Code (DTC) stored|Page 1643 > < Crankshaft Main Bearing Seal|Service and Repair|Page 1634