Passport EX 4WD V6-3.2L DOHC (6VD1) (2000)
/Page-1712004.png)
4. Use installer J-36828 and grip J-8092 then install the outer bearing by driving it into the hub.
5. Apply grease (NLG1 No.2 or equivalent) to the lip portion, then install oil seal by using installer J-36830 and grip J-8092.
6. Install ABS sensor ring, then tighten the bolts to the specified torque.
Torque: 18 Nm (13 ft. lbs.)
7. Install hub and disc assembly.
-
Apply grease in the hub.
-
Apply wheel bearing type grease NLGI No. 2 or equivalent to the outer and inner bearing.
