Passport EX 4WD V6-3.2L DOHC (6VD1) (2000)
/Page-1265001.png)
Axle Nut: Specifications
1. Tighten the hub nut to 29 Nm (22 lb. ft.), then fully loosen the nut.
2. Tighten the hub nut to the value given below, using a spring scale on the wheel pin.
New Bearing and New Oil Seal
Bearing Preload: 20 N - 25 N (4.4 lb. - 5.5 lb.)
Used Bearing New Oil Seal
Bearing Preload: 12 N - 18 N (2.6 lb. - 4.0 lb.)
If the measured bearing preload is outside the specificatoins, adjust it by loosening or tightening the bearing nut.
