honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Torque Converter Clutch Solenoid, A/T > < A/T - Identifying Shift Solenoids|Page 4592
Page 2
background image

5. Install magnet, main case oil pan with new gasket, and sixteen 10 mm screws. Tighten the screws to the specified torque.

Torque: 11 Nm (96 Inch lbs.)

6. Fill transmission through the overfill screw hole of oil pan, using ATF DEXRON-III.
7. Connect battery ground cable.

Torque Converter Clutch Solenoid, A/T > < A/T - Identifying Shift Solenoids|Page 4592