Passport LX 2WD V6-3.2L DOHC (6VD1) (1998)
/Page-2341004.png)
MATERIALS).
15.
Reinstall the door trim panel.
16.
Perform steps 1 through 15, as appropriate, on the right front door.
17.
Turn the headlights on. Use a DVOM or VOM to measure the voltage drop between ground terminal G102 and the head of its mounting bolt.
^
If the voltage drop is 0.2 volt or more, remove the bolt and clean all contact surfaces. Reinstall the bolt and torque it to 10 N.m (7 lb-ft).
^
If the voltage drop is less than 0.2 volt, the connection is good. Make sure the ground bolt is torqued to 10 N.m (7 lb-ft).
18.
Check the operation of the radio.
