Passport LX 2WD V6-3.2L DOHC (6VD1) (1998)
Lower Side Moulding / Trim: All Technical Service Bulletins
Fender Side Moulding - Comes Off
99-017
February 23, 1999
Applies To:
1998-99 Passport - With optional body side moldings
Fender Molding Comes Off.
SYMPTOM
The fender piece of the optional body side molding comes off.
PROBABLE CAUSE
There is not enough adhesive to hold the fender molding in place.
CORRECTIVE ACTION
Replace the missing fender molding using 3M Black Super Silicone Sealant.
PARTS INFORMATION
Left Body Side Molding:
P/N 2-90482-801-0, H/C 5833553
Right Body Side Molding:
P/N 2-90482-802-0, H/C 5833561
REQUIRED MATERIALS
3M Black Super Silicone Sealant:
3M P/N 051135-08662
3M General Purpose Adhesive Cleaner:
3M P/N 051135-08984
WARRANTY CLAIM INFORMATION
In warranty: The normal warranty applies.
Failed part:
P/N 08P22-ED11OO
H/C 5644422
Defect code:
025
Contention code:
A02
Skill level:
Repair Technician
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your Zone Office. You
must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE
1.
Use a suitable cleaning solvent to remove any wax or paint sealer from the molding mounting area. Use isopropyl alcohol to remove any residue
remaining from the cleaner.
2.
At air temperatures of 70°F or less: Warm the fender area with a heat gun or a heat lamp.