Passport LX 2WD V6-3.2L DOHC (6VD1) (1998)
2.
Remove the coil integrated module from the hydraulic valve assembly.
3.
Clean the module mating surface on the hydraulic valve assembly with a clean shop towel.
4.
Install the appropriate new coil integrated module in the reverse order of removal. Torque the screws to 4.4 N.m (39 lb-in).
5.
Reconnect the negative cable to the battery.
6.
Enter the radio station presets, and set the clock.
7.
Fill out and attach a Safety Improvement Campaign Completion label (reorder # Y0660) to the driver's doorjamb, below the Manufacturers
Identification label. If an ABS Module Product Update label is already in that location, peel it off, and attach the new label in its place.
Disclaimer