Passport LX 2WD V6-3.2L DOHC (6VD1) (1998)
/Page-2662001.png)
Marker Lamp Bulb: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Remove the side combination light (2).
^
Remove three screws.
3. Remove the bulb (1).
^
Remove the side marker light socket by turning it counterclockwise.
^
Remove the bulb by turning it counterclockwise while pushing it at the same time.
Installation
To install, follow the removal steps in the reverse order.
