Passport LX 2WD V6-3.2L DOHC (6VD1) (1998)
/Page-160002.png)
-
Slit the case parting face with a knife since the lining is separated when removing the evaporator.
-
Lift to remove the upper case.
9. Remove evaporator core.
10. Remove expansion valve.
-
Tear oft the insulator carefully.
-
Remove the sensor fixing clip.
-
Use a back-up wrench when disconnecting all refrigerant pipes.
Installation
To install, follow the removal steps in the reverse order, noting the following points:
