Passport LX 2WD V6-3.2L DOHC (6VD1) (1998)
/Page-2063001.png)
Trailing Arm: Service and Repair
Upper Link
REMOVAL
1. Remove fuel tank.
2. Remove the speed sensor cable from the upper link.
3. Remove bolt, nut, rubber plate and protector.
4. Remove upper link.
INSPECTION AND REPAIR
Make necessary correction or parts replacement if wear, damage, corrosion or any other abnormal condition are found through inspection.
1. Upper link
2. Rubber bushing:
-
Remove the rubber bushing by using remover J-43008.
