Passport LX 2WD V6-3.2L DOHC (6VD1) (1998)
Windshield Washer Motor: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Remove the fender inner liner (right side).
3. Remove 2 screws, the filler neck and the hose.
4. Disconnect the windshield washer motor connector and remove the washer tank (1).
5. Pull the windshield washer motor(2) from the front washer tank and the rear washer motor (3).
Installation
To install, follow the removal steps in the reverse order.