Passport LX 4WD V6-3.2L DOHC (6VD1) (2000)
Note: Take care not to confuse the alignment mark (2) and the size mark (1) during the installation procedure.
Reassembly
1. Install connecting rod
2. Install piston
3. Install piston pin
-
Apply a thin coat of engine oil to the piston pin. Try to insert the piston pin into the piston pin hole with normal finger pressure.
Note: When changing piston/connecting rod combinations, do not change the piston/piston pin combination and do not reuse the old piston
pin.
-
Attach the piston to the connecting rod with the piston front mark and the connecting rod front mark on the same side.