Passport LX 4WD V6-3.2L DOHC (6VD1) (2000)
Marker Lamp Bulb: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Remove the radiator grille.
-
Refer to Engine Hood and Fender in Body Structure.
3. Remove the front combination light (2).
-
Remove three screws.
4. Remove the bulb (1).
-
Remove the side marker light socket by turning ii counterclockwise.
-
Remove the bulb by turning it counterclockwise while pushing it at the same time.
Installation
To install, follow the removal steps in the reverse order.