Passport LX 4WD V6-3.2L DOHC (6VD1) (2000)
Tires: Service and Repair
Spare Tire
Spare Tire Hanger
Removal
1. Open the hatch gate and tail gate.
2. Remove the spare tire (3).
-
Put the spare tire handle (1) to the center of upper side of rear bumper (2) and turn counterclockwise. Put spare tire down.
3. Remove the spare tire support.
-
Remove the four bolts that are fixed to frame cross member.
4. Remove the spare tire hanger assembly.
-
Remove the two fixing bolts.
Installation
To install, follow the removal steps in the reverse order, noting the following points.
1. Install the spare tire firmly.
2. Tighten the spare tire support fixing bolts to the specified torque.
Torque: 40 Nm (4.1 kg.m)
3. Tighten the spare tire hanger fixing bolts to the specified torque.
Torque: 19 Nm (1.9 kg.m)