honda Workshop Repair Guides

Honda Passport LX 4WD V6-32L DOHC Workshop Service and Auto Repair Manuals

Engine Controls - CHECK TRANS/CRUISE SET Lamps Flashing|Page 3836 > < Engine Controls - Engine Stalls After Cold Start|Page 3831
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - CHECK TRANS/CRUISE SET Lamps Flashing

01-044

May 8, 2001

Applies To: 
2000 Passport - ALL
2001 Passport - From VIN 4S6..58W.14400001 thru 4S6..58W.14409430

CHECK TRANS and CRUISE SET Indicators Are Flashing

SYMPTOM

The CHECK TRANS and CRUISE SET indicators on the instrument panel flash when the ignition switch is turned to ON (II).

PROBABLE CAUSE

Using a brand of spark plugs other than Denso can cause the PCM to detect an additional crank sensor pulse. If this happens, the PCM resets itself and
turns on the CHECK TRANS and CRUISE SET indicators.

CORRECTIVE ACTION

Update the PCM software with the Smart Cable.

TOOL INFORMATION

PGM Tester loaded with SN131 (04/16/01) or later software.

For other tools and equipment needed to update the PCM software, refer to Service Bulletin 99-005, Updating the Passport PCM, filed under Tools.

WARRANTY CLAIM INFORMATION

In warranty: 
The normal warranty applies.

Operation Number:

122305

Flat Rate Time:

0.3 hour

Failed Part:

P/N 8-09392-189-0 
H/C 6392971

Defect Code:

093

Contention Code:

C05

Template ID:

01-044A

Skill Level:

Repair Technician

Out of warranty: 
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your Zone Office. You
must request consideration, and get a decision, before starting work.

REPAIR PROCEDURE

1.

Retrieve the PCM broadcast code with the PGM Tester. (From the MISC. TESTS menu, select BROADCAST CODE).

Engine Controls - CHECK TRANS/CRUISE SET Lamps Flashing|Page 3836 > < Engine Controls - Engine Stalls After Cold Start|Page 3831