Passport LX 4WD V6-3.2L DOHC (6VD1) (2000)
Seat Belt: Service and Repair
Front
Front Seat Belt Buckle
Removal
1. Disconnect the battery ground cable.
2. Disconnect the seat belt warning connector (driver's side) and remove a clip.
3. Remove the front seat buckle assembly (1).
Installation
To install, follow the removal steps in the reverse order, noting the following point.
1. Tighten the buckle anchor bolt to the specified torque.
Torque: 39 N.m (29 lb ft)
Hard Top