honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Interior - Rear Beverage Holder Swing Arm Won't Lock|Page 5418 > < Suspension - Drifting & Pulling At Highway Speeds|Page 5412
Page 1
background image

Drink Holders: All Technical Service Bulletins
Interior - Rear Beverage Holder Swing Arm Won't Lock

02-022

April 9, 2002

Applies To: 
1999-02 Passport - ALL

Rear Beverage Holder Swing Arm Does Not Lock

SYMPTOM

The rear beverage holder swing arm does not firmly stay in an open or closed position because the detents do not hold.

PROBABLE CAUSE

One or both metal detent clips are out of place or missing.

CORRECTIVE ACTION

Replace both detent clips.

PARTS INFORMATION

Rear Beverage Holder Detent Clip (two required):

P/N 8-97212-275-0, H/C 7084197

WARRANTY CLAIM INFORMATION

In warranty: 
The normal warranty applies.

Operation Number:

044104

Flat Rate Time:

0.3 hour

Failed Part:

P/N 8-97292-133-3 
H/C 6193379

Defect Code:

030

Contention Code:

B02

Template ID:

02-022A

Skill Level:

Repair Technician

Out of warranty: 
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your Zone Office. You
must request consideration, and get a decision, before starting work.

REPAIR PROCEDURE

Interior - Rear Beverage Holder Swing Arm Won't Lock|Page 5418 > < Suspension - Drifting & Pulling At Highway Speeds|Page 5412