Passport LX 4WD V6-3.2L DOHC (6VD1) (2000)
/Page-1263005.png)
12. Using snap ring pliers, install the snap ring (1) securing the ball retainer to the shaft.
13. Align the track on the ball (1) retainer with the window in the cage, and install the six balls into position.
14. Pack 150 g of the specified grease in DOJ case, then install drive shaft joint assembly. After reassembly, move the DOJ longitudinally several
times to get to fit.
15. Install the circlip (1) so that open ends are positioned away from the ball groove.
