Passport LX 4WD V6-3.2L DOHC (6VD1) (2000)
/Page-2346003.png)
2. Install the spacer.
-
Attach spacers in ten locations as shown in the figure.
-
Always use new spacer.
3. Install the windshield upper molding.
-
Peel off the tear-away paper from the windshield upper molding, and start applying it with one end of the glass and cut away the surplus at the
other end of the glass for length adjustment.
-
Always use new upper molding.
4. Temporary install the windshield support.
5. Apply the primer to the windshield and body panel.
-
Apply the primer (3) (Sun star # 435-40 or equivalent) to the windshield side bonding surface as shown in the figure.
-
Apply the primer (Sun star # 435-95 or equivalent) to the body side bonding surface.
NOTE: Apply an adhesive 3 minutes or more but within 24 hours after the application of primer. If more than 24 hours have passed, reapply
