Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
2. Remove the regulator handle (1).
-
Pull the hook (2) out and remove the regulator handle.
3. Remove the one screw from the pullcase.
4. Remove the inside handle fixing screw.
CAUTION: Do not apply excessive force on the inside handle link or damage may occur, which could make the inside handle difficult to operate.
5. Remove the rear door corner garnish.
-
Pull the garnish to disconnect the retaining clip.
6. Remove the door trim panel.
-
Pull out the eight clip positions from the door panel.
-
Disconnect the power window switch connector to lift the trim panel and unlock the engagement of the waist seal section, then pass the inside
lever through the mounting hole of the trim panel, and detach the trim panel.
