Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
3. Carefully use adjustable pliers to bottom the piston into the caliper bore. Do not pull or twist the flexible hose or damage will occur. Install caliper
assembly. Set caliber assembly in place.
4. Install lock bolt (5) and tighten the bolt to the specified torque.
Torque: 74 Nm (54 ft. lbs.)
5. Install wheel and tire assembly.
6. Pump the brake pedal several times to make sure that the pedal is firm. Check the brake fluid level in the reservoir after pumping the brakes.
