Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
Push the primary piston (1) with your fingers to check that it travels smoothly. If the motion is questionable, replace the master cylinder as a complete
assembly.
Functional Inspection of Master Cylinder
Inspect the master cylinder for functionality described. Replace if necessary.
Install the primary piston holder (3) J-39242 (including the master cylinder attachment (5) and master cylinder plug (7)) onto the master cylinder (4).
Make sure the spacer (2) (2 bolts) with its adjusting bolt is screwed in up to the "0" line.
Connect the master cylinder attachment (5) J-39242 with the end of the radiator cap tester (6) J-24460-01, and apply air pressure with the cap tester.
