Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
Installation
1. Install plate and seal assembly.
2. Install retainer.
3. Install 2 gaskets and spacer.
4. Install filter.
5. Install silencer.
6. Install valve body guard.
7. Install retainer.
8. Install lock nut and yoke clevis and tighten to the specified torque.
Torque: 20 Nm (15 ft. lbs.)
9. Install vacuum booster.
10. Install master cylinder and after installation, perform brake pedal check and adjustment.