Honda Workshop Service and Repair Manuals > Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001) > Engine, Cooling and Exhaust | Engine | Timing Components | Timing Belt | Component Information | Service and Repair

Timing Belt Removal and Engine Timing|Page 1522 > < Timing Belt|Specifications

Page 1

Timing Belt: Service and Repair
Timing Belt Removal and Engine Timing

THIS ARTICLE HAS BEEN UPDATED BY TSB 02-047

TIMING BELT REMOVAL

NOTE:

Left and right engine callouts are from the driver's seat.

1. Disconnect battery ground cable.
2. Remove air cleaner assembly.
3. Remove radiator upper fan shroud from radiator.

4. Move drive belt tensioner, to loose side, using wrench then remove drive belt.
5. Remove cooling fan assembly four nuts, then the cooling fan assembly.
6. Remove cooling fan drive pulley assembly.
7. Remove idle pulley assembly.
8. Remove serpentine belt tensioner assembly.
9. Remove power steering pump assembly.

10. Remove crankshaft pulley assembly using J-8614-01 crankshaft holder, hold crankshaft pulley remove center bolt, then the pulley.

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Belt / Component Information
Service and Repair
Timing Belt Removal and Engine Timing

Timing Belt Removal and Engine Timing|Page 1522 > < Timing Belt|Specifications

Honda Workshop Service and Repair Manuals

Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)

Engine, Cooling and Exhaust Engine Timing Components Timing Belt / Component Information Service and Repair Timing Belt Removal and Engine Timing

Engine, Cooling and Exhaust Engine Timing Components Timing Belt / Component Information Service and Repair Timing Belt Removal and Engine Timing

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Belt / Component Information
Service and Repair
Timing Belt Removal and Engine Timing

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Belt / Component Information
Service and Repair
Timing Belt Removal and Engine Timing