Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
Blower Motor: Service and Repair
Blower Assembly
Blower Assembly And Associated Parts
Removal
1. Disconnect the battery ground cable.
2. Discharge and recover refrigerant (with air conditioning).
3. Remove instrument panel assembly.
4. Disconnect resistor connector.
5. Remove knee bolster bracket.
6. Remove duct.
7. Remove evaporator assembly (A/C only).
8. Disconnect blower motor connector.
9. Remove blower assembly.
Installation
To install, follow the removal steps in the reverse order.
