Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
3. Remove the bolt and the clamp securing the VSS in place.
IMPORTANT: Have a container ready to catch any fluid that leaks out when the VSS is removed from the transfer case for 4WD and on the
extension cover for 2WD.
4. Remove the VSS from the transfer case by wiggling it slightly and pulling it straight out.
Installation Procedure
1. Install the VSS in the transfer case with the notch for the connector facing the rear.
2. Secure the VSS in place with the clamp and the bolt.
Tighten
-
Tighten the bolt to 16 N.m (12 lb.ft.).
