Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
2. Carefully install spring pin with hammer to avoid damage to valve body, etc.
3. Connect wiring harness to solenoids.
4. Install oil filter with a new gasket and the three 13 mm screws, tighten to the specified torque.
Torque: 20 Nm (15 ft. lbs.)
5. Install magnet, main case oil pan with new gasket, and sixteen 10 mm screws. Tighten the screws to the specified torque.
Torque: 11 Nm (96 inch lbs.)
6. Fill transmission through the overfill screw hole of oil pan, using ATF DEXRON III.
7. Connect battery ground cable.