Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
Axle Disconnect Controller
1. Connect 12V with terminal (3) and the ground with the terminal (6).
2. Send the signal to the terminal (4)
2WD -> 4WD less than 2.4V
4WD -> 2WD more than 9.0V
3. Confirm the output signal from the terminals (1) & (2) (2 seconds output)
4. If the trouble occurs after test, charge the Axle Disconnect Controller to the new one.
Motor Actuator Assembly (Transfer)
Inspect the function of the motor actuator assembly as follows:
1. Disassemble the motor actuator from transfer rear case.
