Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
12. Remove the three SDM fixing bolts (4) and remove SDM (3).
Installation
1. Install the SDM (1) on bracket and fixing bolts (4) and tighten the fixing bolts to the specified torque.
Torque: 10 ± 3 N.m (1.0 ± 0.3 kg.m / 87 ± 26 lb.in)
2. Connect the SDM harness connector (3) and after that, put CPA into connector (2).
3. Install air conditioning duct for rear seat to normal position.
4. Return carpet normal position.
5. Install right side stay between instrument panel and floor, tighten to the specified torque.
Torque: 10 ± 3 N.m (1.0 ± 0.3 kg.m / 87 ± 26 lb.in)
6. Install PCM with bracket and tighten to the specified torque. (Y22SE 2.2L Engine only)
Torque: 10 ± 3 N.m (1.0 ± 0.3 kg.m / 87 ± 26 lb.in)
