Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
4. Use installer J-36828 and grip J-8092 then install the outer bearing by driving it into the hub.
5. Apply grease (NLGI No. 2 or equivalent) to the lip portion, then install oil seal by using installer J-36830 and grip J-8092.
6. Install ABS sensor ring, then tighten the bolts to the specified torque.
Torque: 18 Nm (13 ft. lbs.)
7. Install hub and disc assembly.
-
Apply grease in the hub.
-
Apply wheel bearing type grease NLGI No. 2 or equivalent to the outer and inner bearing.
Grease Amount
Hub: 35 g (1.23 oz)
Outer bearing: 10 g (0.35 oz)
Inner bearing: 15 g (0.53 oz)
