Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
4. Install the rear companion flange (2) and O-ring (2).
5. Use the companion flange holder J-8614-11 to install a new end nut (2) and tighten to the specified torque.
Torque: 167 Nm (123 ft. lbs.)
6. Use the punch J-39209 to stake the end nut at two spots.
NOTE: Be sure to confirm that there is no crack at the staked portion of the end nut (2) after staking.
7. Connect the rear propeller shaft to the transfer case and tighten to the specified torque.
Torque: 63 Nm 46 (ft. lbs.)
