Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
-
Always use new upper molding.
4. Temporary install the windshield support.
5. Apply the primer to the windshield and body panel.
-
Apply the primer (3) (Sun star # 435-40 or equivalent) to the windshield side bonding surface as shown in the figure.
-
Apply the primer (Sun star #435-95 or equivalent) to the body side bonding surface.
NOTE: Apply an adhesive 3 minutes or more but within 24 hours after the application of primer. If more than 24 hours have passed reapply
primer.
Primer should be handled as following;
1. Use the primer manufactured 3 months or less ago and having been kept in an refrigerator.
2. Wipe off primer-stains on positions other than requires application.
3. Stir the primer for a minute or more before use.
6. Apply the adhesive (1) to the windshield.
-
After drying primer completely, apply a sealing adhesive (Sun star # 555 or equivalent) along the edge of the glass so that the sealing adhesive
has a 20 mm (0.79 in) junction at middle of the base of the glass.
NOTE: Apply an adhesive 3 minutes or more but within 24 hours after the application of primer. If more than 24 hours have passed, reapply
primer
