Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
Adhesive should be handled as follows:
1. Use the adhesive manufactured 3 months or less ago.
2. Wipe off adhesive-stains on positions other than requires application.
7. Install the windshield.
-
Set the windshield with sealing adhesive applied to entire circumference in the body panel. Specifically, adjust windshield support with the
upper molding making contact with the body panel, press the glass, and tighten the windshield support.
NOTE: Affix the glass within 5 minutes of application.
8. Install the front cowl cover.
9. Install side molding.
-
Use alcohol wipe or equivalent cleaner with soft cloth to wipe away any excess adhesive.
-
Cure the bonding at a temperature of 20 °C - 30 °C (68 °F - 86 °F) for 24 hours.
-
Check the windshield for any signs of water leak.
10. Install windshield wiper arm.
