Pilot V6-3.5L (2004)
-
Select Settings.
-
Select About.
^ iPod reset procedure: http://docs.info.apple.com/ article.html?artnum=61705
Resources for Installation Instructions
Online, enter the model and year, enter the keyword MUSIC LINK, and select the appropriate installation instructions.
Music Link First-Use Information
After installing the Music Link kit, switch the audio unit to AUX (auxiliary) mode and verify the audio unit displays CDC EJECT or CD4 EJECT.
Connect the iPod to the Music Link connector. Make sure the check mark is displayed on the iPod display screen and that you hear music.
^ The Music Link disc supplied in the kit contains the TTS software and the User's Guide. It is for home computer use only.
^ The customer needs to load the TTS software/User's Guide on his/her home computer in order for all of the search functions (Disc 1-4) to operate.
^ Only the shuffle functions (Disc 5-6) will operate without the TTS software installed (see the Quick Reference Guide).
^ For the search functions (Disc 1-4) to operate properly, TTS software must be run after any songs are changed (added or removed) on the iPod.
^ You can change the Disc position on most audio units by using the Disc - (preset number 5) and Disc + (preset number 6). Always refer to the User's
Guide for proper operation.
iPod Reset Procedure Information
The iPod reset procedure applies to these Apple iPod models:
^ Fifth-generation or later iPod (also known as iPod with video)
^ iPod nano(R)
^ iPod with color display (iPod photo)
^ iPod mini(R)
NOTE:
To view this information online, log on to http//docs.info.apple.com/article.html?artnum=6 1705 To reset the customer's iPod:
1.
Cycle the Hold switch on and off (slide it to Hold, then turn it off again).
2.
Press and hold the Menu and Select buttons for 6-10 seconds until the Apple logo appears.
NOTE:
If you are having difficulty resetting the iPod, set it on a flat surface. As you press the Select button, make sure your finger does not touch any
part of the click wheel. Also make sure that you press the Menu button toward the outside of the click wheel and not near the center.
3.
If the above steps do not work, try connecting the iPod to a power adapter and plug the power adapter into an electrical outlet, or connect the iPod
to your computer. Make sure the computer is on and isn't set to sleep mode.
BEFORE TROUBLESHOOTING
^ Before troubleshooting, ask the customer these questions:
-
What is the main issue?
-
What model and generation iPod do you have? Refer to www.apple.com.
-
What version iPod firmware (unit software) is loaded?
^
Go to the Main Menu.
^
Select Settings.
