Pilot V6-3.5L (2004)
9. Reconnect the passenger's multiplex control unit to the passenger's under-dash fuse/relay box, and perform the given input tests at the appropriate
connectors on the passenger's under-dash fuse/relay box.
For passenger's under-dash fuse/relay box connector socket location.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 10.
Door Unit
10. Remove the door multiplex control unit, and disconnect its connector.
11. Inspect the connector and socket terminals to be sure they are making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 12.
