honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Multiplex Control System Troubleshooting|Page 6447 > < Multiplex Control System Troubleshooting|Page 6445
Page 7
background image

4. Check for continuity between A23 terminal of the driver's under-dash fuse/relay box socket and No. 15 terminal of the door multiplex control unit

connector A (20P).

Is there continuity?

YES - Replace the multiplex control unit most closely related to the failure.

NO - Repair an open in the wire between the door multiplex connector and the driver's under-dash fuse/relay box. If the wire is OK, replace the
driver's under-dash fuse/relay box.

PNK Wire Communication Line Test

1. Disconnect driver's multiplex control unit connector B (22P).
2. Disconnect passenger's multiplex control unit connector B (22P).

3. Check for continuity between B1 terminal of the driver's multiplex connector B (22P) and B9 terminal of the passenger's multiplex connector B

(22P).

Is there continuity7

YES - Replace the multiplex control unit most closely related to the failure.

NO - Repair an open in the wire between the driver's multiplex control unit connector B (22P) and the passenger's multiplex control unit connector
B (22P).

Shorted Communication Line Test

1. Remove the driver's multiplex control unit from the driver's under-dash fuse/relay box.
2. Carefully pry off the driver's door switch trim.
3. Disconnect door multiplex connector A (20P).
4. Disconnect passenger's multiplex control unit connector B (22P).

Multiplex Control System Troubleshooting|Page 6447 > < Multiplex Control System Troubleshooting|Page 6445