Pilot V6-3.5L (2004)
Front Door Latch: Service and Repair
Front Door Latch Replacement
NOTE: Put on gloves to protect your hands.
1. Remove these items:
-
Door pane
-
Plastic cover, as necessary
2. Raise the glass fully, and remove these items:
-
Center lower channel
-
Lock rod protector
3. Disconnect the outer handle rod and cylinder rod.
4. Remove the latch (A). Take care not to bend the outer handle rod (B), cylinder rod (C), lock rod (D), and inner handle rod (E).
1. Release the inner handle rod from the rod holder (F).
2. Disconnect the connectors (G).
3. Remove the screws.
4. Remove the latch from the hole in the door.
5. Install the latch in the reverse order of removal, and note these items:
-
Make sure the actuator connectors are plugged in properly, and each rod is connected securely.
-
Make sure the door locks and opens properly.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its perimeter.
