Pilot V6-3.5L (2004)
Hood Latch Release Cable: Service and Repair
Hood Opener Cable Replacement
1. Remove these items from the left side of the vehicle:
-
Front inner fender
-
Kick panel
2. Remove the hood latch (A), and disconnect the hood opener cable (B).
3. Remove the hood release handle (C), and disconnect the hood opener cable.
4. Using a clip remover, detach the clips (D, E) from the body, then remove the hood opener cable from the vehicle. Take care not to bend the cable.
5. Install the cable in the reverse order of removal, and note these items:
-
Replace any damaged clips.
-
Push the clips into place securely.
