Pilot V6-3.5L (2004)
Carpet: Service and Repair
Carpet Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to damage, wrinkle or twist the carpet.
-
Be careful not to damage the dashboard or other interior trim pieces.
1. Remove these items:
-
Front seats, both sides
-
Second row seats, both sides
-
Third row seats, both sides
-
Kick panels, both sides
-
B-pillar lower trim, both sides
-
Console side trim, both sides
-
Console rear trim
2. Remove the carpet (A).
1
Release the fastener (B), then pull back the carpet from under the dashboard and center console (C).
2. Pull out the carpet from under both rear side trim panels (D).
3. Install the carpet in the reverse order of removal, and note these items:
-
Take care not to damage, wrinkle or twist the carpet.
-
Make sure the seat harnesses are routed correctly.
-
Slip the carpet under both rear side trim panel and center console properly.
