honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Trim Removal/Installation - Cargo Areas|Page 6735 > < Trim Removal/Installation - Cargo Areas
Page 1
background image

Trim Panel: Service and Repair
Trim Removal/Installation - Rear Side Area

Trim Removal/Installation - Rear Side Area 

NOTE: 

-

Put on gloves to protect your hands.

-

When prying with a fiat-tip screwdriver, wrap it with protective tape to prevent damage.

-

Take care not to bend or scratch the trim and panels.

1. Remove these items, then remove the trim in the sequence shown:

-

Rear door sill trim

-

D-pillar trim

-

Rear trim panel

-

Third row seat

2. Install the trim in the reverse order of removal, and note these items:

-

Replace any damaged clips.

-

Push the clips and hooks into place securely.

-

Make sure there are no pinches in the belt.

Trim Removal/Installation - Cargo Areas|Page 6735 > < Trim Removal/Installation - Cargo Areas