Pilot V6-3.5L (2004)
Seat Cover: Service and Repair
Front Seat Cover
Front Seat Cover Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
NOTE:
-
Do not repair torn or frayed seat-back covers. if necessary, replace the seat-back cover.
-
Take care not to tear the seams or damage the seat covers.
-
Do not touch the OPDS sensor in the seat-back pad, and keep it away from oils. Oils can corrode the sensor causing into fail.
-
Put on gloves to protect your hands.
Seat-back Cover
1. Fold the seat-back forward.
2. While pushing both release buttons (A) in the seat-back, raise the headrest (B) to remove it.
3. Detach the clips by pulling on the bottom of the back panel (A) back, then pull the panel upward to release the hooks (B) from the seat-back frame,
and remove the panel.
