Pilot V6-3.5L (2004)
7. Pull back the edge of the seat-back cover (A) all the way around, then release all of the clips (B). Remove the seat-back cover (C).
8. Install the seat-back cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook and
clips.
-
Replace any clips (A) you removed with new ones using commercially available upholstery ring pliers (B).
Seat Cushion Cover
1. Remove both front mounting bolts.
2. On the left third row seat: Remove the seat belt buckle pocket, the left third row seat belt buckle, and the center third row seat belt detachable
anchor under the seat cushion.
3. Remove the pivot bolt cover from both sides.
