Pilot V6-3.5L (2004)
Brake pad replacement and disc resurfacing is not needed to get rid of the clunk.
2.
Apply a thin coat of M-77 assembly paste to the new brake pad shims in these areas:
^
The back of inner shim A and outer shim D.
^
Both sides of inner shim B and outer shim C.
3.
Install the new brake pad shims (four per side) on each rear caliper. For Pilots, refer to the 2003-04 Pilot Service Manual, page 19-19. For
Odysseys, refer to the 1999-04 Odyssey Service Manual, page 19-26.
Disclaimer