Pilot V6-3.5L (2004)
6. Clean the threaded portions of the clevis A, and coat the threads with multipurpose grease. Clean the sliding surface of the clevis B. and coat the
sliding surface with multipurpose grease. Install the clevis A and B on the adjuster (C), and shorten the clevis A by turning the adjuster.
7. Reinstall the brake shoe adjuster assembly (D), and hook the lower return spring (E) on the parking brake shoes.
8. Install the rod spring (A) to the connecting rod (B) first. Then install the connecting rod on the parking brake shoes.
9. Install the tension pin (A), retainer spring (B), and retainer (C) of the forward brake shoe (D).
10. Install the upper return springs (A).
11. Install the rear brake disc/drum and rear brake caliper.
