Pilot V6-3.5L (2004)
Cruise Control Switch: Service and Repair
Set/Resume/Cancel Switch
Set/Resume/Cancel Switch Test/Replacement
1. Remove the driver's airbag.
2. Remove the cover (A), then remove the set/resume/ cancel switch (B).
3. Check for continuity between the terminals in each switch position according to the table.
-
If there is continuity, and it matches the table, but switch failure occurred on the cruise control actuator input test, check and repair the wire
harness on the switch circuit.
-
If there is no continuity in one or both positions, replace the switch.
