Testing and Inspection of Radiator Cooling Fan Motor for 2004 Pilot V6-35L
11. Disconnect the condenser fan motor 2P connector.
12. Check for continuity between condenser fan relay 4P socket terminal No. 2 and condenser fan motor 2P connector terminal No. 2.
Is there continuity?
YES - Go to step 13.
NO - Repair an open in the wire between condenser fan relay 4P socket terminal No. 2 and condenser fan motor 2P connector terminal No. 2.
13. Check for continuity between condenser fan motor 2P connector terminal No. 1 and fan control relay 5P socket terminal No. 1.
Is there continuity?
YES - Replace the condenser fan motor.
NO - Repair an open in the wire between condenser fan motor 2P connector terminal No. 1 and fan control relay 5P socket terminal No. 1.
Troubleshooting E
Troubleshooting E
NOTE: Refer to the symptom troubleshooting index before troubleshooting.
1. Remove the condenser fan relay, and test it.
Is the relay OK?
YES - Go to step 2.
NO - Replace the relay.
2. Disconnect radiator fan switch C 2P connector and turn the ignition switch ON (II).
Does the radiator fan stop?
YES - Replace radiator fan switch C and recheck.
NO - Go to step 3.
3. Turn the ignition switch OFF.
4. Remove the radiator fan relay and fan control relay, then disconnect fan control module 8P connector, powertrain control module (PCM)
connector A (32P), and A/C pressure switch 4P connector.