Pilot V6-3.5L (2004)
7. Check for continuity between the No. 1 terminal of the rear mode control motor 7P connector and body ground.
Is there continuity?
YES - Go to step 8.
NO - Check for an open in the wire between the rear mode control motor and body ground. If the wire is OK, check for ground at G501.
8. Check for continuity between the No. 7 terminal of the rear heater-A/C control switch connector B (10P) and body ground.
Is there continuity?
YES - Go to step 9.
NO - Check for an open in the wire between the rear heater-A/C control switch connector and body ground. If the wire is OK, check for ground at
G501.
9. Test the rear mode control motor.
Is the rear mode control motor OK?
YES - Go to step 10.
NO - Replace the rear mode control motor.
10. Check for continuity between body ground and rear heater-A/C control switch connector B (10P) terminals No.1, 2, 3, 4, 5 and 6 individually.
Is there continuity?
YES - Repair any short to body ground in the wire(s) between the rear heater-A/C control switch and the mode control motor.
NO - Go to step 11.