Pilot V6-3.5L (2004)
Air Register: Service and Repair
Dashboard Side Vent Removal/Installation
NOTE:
-
Take care not to scratch the driver's panel or middle panel.
-
The driver's side vent is shown, the passenger's side vent is similar.
1. Remove the dashboard side vent (A).
1. Wrap a flat-tip screwdriver with protective tape, and apply protective tape around the related parts to prevent damage.
2. Carefully insert a flat-tip screwdriver next to the upper pivot portion (B).
3. Gently pry out on the side vent to release the upper pivot portion.
4. Release the bottom pivot portion (C).
5. If necessary, remove the bottom pivot bushing (D).
2. Reinstall the side vent onto the bottom pivot portion first, then reinstall it onto the upper pivot portion. Make sure that both pivot portions are
installed securely.
